A Sieve bend has a greater screening capacity than a flat screen due to forces exerted as material flows against the curved surface. This curved profile wire screen is mounted in a frame with the screen openings perpendicular to the flow. In a typical feed situation, the leading edge of the wedge wire removes the water and the fine particles through the screen up to cut point size, as the oversized particles move across the top of the screen. Separation size is considerably smaller than screen openings, usually about one-half the opening size. Sieve bend screens are ideal for sizing and dewatering applications in liquid/solid separation situations.
Screens- Sieve bend made of Heavy SS 304 wire bend at normal 30/45/60/90 degree or any other angle with Slit opening or Bar spacing from 0.30MM to 2.00MM. (Higher or lower on request) with width from 500MM to 3000MM (including section bars as per request) in Looped or Welded type