These Screens are available in Bar/ Opening size (Slot) from 0.20MM to 2.00MM) and are offered in Drum Dia of 800MM upto 2500MM with lengths from 1000MM to 9000MM [assembled]. These are available in Welded type. These are also know widely as Juice screens are used in place of DSM for a wider and efficient Juice output. A Rotary Juice has a greater screening capacity than a Sieve Bend or Flat screen due to circular forces exerted as material flows against the curved surface. This curved profile wire screen is mounted in a frame with the screen openings perpendicular to the flow. In a typical feed situation, the leading edge of the wedge wire removes the water and the fine particles through the screen up to cut point size, as the oversized particles move across the top of the screen. Separation size is considerably smaller than screen openings, usually about one-half the opening size. Rotary screens are ideal for sizing and dewatering applications in liquid/solid separation situations for a bigger capacity.
Screens- Rotary Welded Screens made of Heavy SS 304 wire bend at normal 30/45/60/90 degree or any other angle with Slit opening or Bar spacing from 0.20MM to 2.00MM (Higher or lower on request) with screen segment sectors width from 500MM to 3000MM. These are also supplied fitted with Circular End Rings and Axial Flanges as end bars [with or without holes], Vertical and Horizontal Stiffeners for the screen structure support, Ribs welded between the circular end rings to the screen ends in Welded type